On hyperbolic virtual polytopes and hyperbolic fans

Hyperbolic virtual polytopes arose originally as polytopal versions of counterexamples to the following A.D.Alexandrov’s uniqueness conjecture: Let K ⊂ ℝ³ be a smooth convex body. If for a constant C, at every point of ∂K, we have R ₁ ≤ C ≤ R ₂ then K is a ball. (R ₁ and R ₂ stand for the principal curvature radii of ∂K.) This paper gives a new (in comparison with the previous construction by Y.Martinez-Maure and by G.Panina) series of counterexamples to the conjecture. In particular, a hyperbolic virtual polytope (and therefore, a hyperbolic hérisson) with odd an number of horns is constructed. Moreover, various properties of hyperbolic virtual polytopes and their fans are discussed.     

表面细分技术在二维声辐射和声散射中的应用

把表面细分技术应用于求解边界积分方程，既能把CAD模型直接用于边界元分析，又能精确描述复杂的边界几何形状，实现网格自动加密和形函数自动升阶，满足误差要求。把它应用于简单的二维声辐射和声散射，结果表明对提高边界元方法的计算精度是有效的。     

Linear least squares problems with data over incomplete grids

The paper addresses bivariate surface fitting problems, where data points lie on the vertices of a rectangular grid. Efficient and stable algorithms can be found in the literature to solve such problems. If data values are missing at some grid points, there exists a computational method for finding a least squares spline by fixing appropriate values for the missing data. We extended this technique to arbitrary least squares problems as well as to linear least squares problems with linear equality constraints. Numerical examples are given to show the effectiveness of the technique presented. AMS subject classification (2000)  65D05, 65D07, 65D10, 65F05, 65F20     

Scattering from infinite rough tubular surfaces

We study the Helmholtz equation in the exterior of an infinite perturbed cylinder with a Dirichlet boundary condition. Existence and uniqueness of solutions are established using the variational technique introduced (SIAM J. Math. Anal. 2005; 37 (2):598–618). We also provide stability estimates with explicit dependence of the constants in terms of the frequency and the perturbed cylinder thickness. Copyright © 2006 John Wiley & Sons, Ltd.     

地质建模中的B样条曲面拟合

Pigel和Tiller提出了简明、灵活的B样条曲面拟合方法.本文在Pigel和Tiller的方法的基础上,提出了适用于地质建模的基于重采样的B样条曲面拟合方法.该方法首先用重心坐标对原始的数据点进行重采样,然后对重采样得到的数据点进行拟合.拟合的误差可以通过修改控制顶点的个数来控制.结果表明:拟合得到的B样条曲面是光顺的.     

相干梯度敏感干涉测量技术及在静态断裂力学实验中的应用

介绍了相干梯度敏感(CGS)干涉测量技术的基本原理及其在静态Ⅰ型断裂实验中的应用,验证了该方法对裂纹尖端局部变形场和断裂特性进行定量研究的可行性。给出了代表静态Ⅰ型裂纹尖端奇异场光力学信息的CGS控制方程,模拟并分析了Ⅰ型裂纹尖端的CGS条纹模式,对静态Ⅰ型裂纹尖端变形场和断裂特性进行了三点弯曲的CGS试验,并提取了应力强度因子KⅠ。结果表明,试验结果与理论分析结果相吻合。     

Surface rumpling of cubic CaTiO3 from density functional theory

In this paper, the structure of cubic CaTiO3 （001） surfaces with CaO and TiO2 terminations has been studied from density functional calculations. It has been found that the Ca atom has the largest relaxation for both kinds of terminations, and the rumpling of the CaO-terminated surface is much larger than that of TiO2-terminated surface. Also we have found that the metal atom relaxes much more prominently than the O atom does in each layer. The CaO-terminated surface is slightly more energetically favourahle than the TiO2-terminated surface from the analysis of the calculated surface energy.     

基于简单碰撞理论煤粉燃烧动力学模型的研究-PART Ⅲ:氧气可达比表面积

根据不同温度下氧分子平均自由程的大小,比较了小孔、中孔和大孔中三种扩散速率与煤焦表面燃烧速度的大小.研究表明2000 K以内,颗粒表面分子扩散速率比氧化反应速率大1个数量级以上,过度扩散速率不小于氧化速率.温度小于1200K时,燃烧速率比Knudsen扩散速率小1～5个数量级,扩散孔径小于15～28 nm,反应主要在内外表面进行;1200～1600K时,燃烧速率与Knudsen扩散速率相当,扩散临界孔径28～38 nm,反应在外表面及浅层内表面进行;温度1600K以上时,Knudsen扩散速率比燃烧速率小1个数量级,孔径38～50 nm以下内表面上碳的氧化速度受扩散控制.煤焦的氧化主要发生在Knudsen扩散临界孔径10～50 nm以上的氧气可达表面上.     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁